Table 6-1 Conveyor Position Controls: Jog Distance - Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual

3. Conveyor position controls (Figure 6-10) operate as follows:
On the X-Y control panel, the arrows pointing to the
left and the arrows pointing to the
On the X-Y control panel, the arrows pointing
the dispensing area and the arrows pointing
the dispensing area.
NOTE The single arrows
distances per mouse click as specified in Table 6-1.
Movement
Notes: (1) Default distances. Refer to the Fluidmove User Guide or
4. Dispensing Head position controls (Figure 6-11) operate as follows:
On the X-Y control panel, the arrows pointing to the
left and the arrows pointing to the
On the X-Y control panel, the arrows pointing
back of the dispensing area and the arrows pointing
dispensing area.
On the Z-axis control panel, the arrows pointing
and the arrows pointing
NOTE Refer to Table 6-3 for a detailed explanation of position control commands for both the
dispensing head and conveyor.
Operation
and double arrows

Table 6-1 Conveyor Position Controls: Jog Distance

Axis
Y 0.0254 (0.001)
X 0.0254 (0.001)
Fluidmove Online Help to modify jog distances.
(2) Distance per mouse click on the arrow button.
move it downward.
Down
move the conveyor belt to the
Left
move it to the right.
Right
move the rear rail toward the back of
Up
move the rear rail toward the front of
Down
move the conveyor rail or belt different
Distance
(2)
mm (inch)
1.27 (0.0500)
1.27 (0.0500)
move the dispensing head to the
Left
move it to the right.
Right
move the dispensing head toward the
Up
Down
move the dispensing head upward
Up
(1)
move it toward the front of the
6-11