Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual page 213

M SDS - MULTEMP PS NO 2-A 07-350 (Continued)
2 H
SECTION VII - Precautions for Safe Handling and Use
Steps if Material Released/Spilled
Waste Disposal Method
Handling and Storage Precautions
Other Precautions
SECTION VIII - Control Measures
Respiratory Protection
Ventilation
Protective Gloves
Eye Protection
Other Protective Equipment
SECTION IX - Label Data
Protect Eye
Protect Skin
Protect Respiratory
Chronic Indicator
Contact Code
Fire Code
Health Code
React Code
SECTION X - Transportation Data
SECTION XI - Site Specific/Reporting Information
Volatile Organic Compounds (P/G)
Volatile Organic Compounds (G/L)
SECTION XII - Ingredients/Identity Information
Ingredient #
Ingredient Name
CAS Number
Percent
Appendix A - Material Safety Information
TRANSFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE W/ AN INERT
MATERIAL SUCH AS EARTH, SAND, &
VERMICULITE. SWEEP UP & DISPOSE SOLID
WASTE IN ACCORDANCE W/ LOCAL, STATE &
FED REGS
DISPOSE OF IN ACCORDANCE W/ STATE,
LOCAL & FED REGS. INCINIRATE IN ACCORD.
W/ APPLICABLE REGS. MATERIAL MAY BE
RECOVERED & RECYCLED
KEEP CONTAINER CLOSED UNTIL READY FOR
USE. STORAGE AWAY FROM FIRE SOURCE OR
SUNLIGHT & IN COOL DRY AREA
DO NOT USE PRESSUE TO EMPTY
CONTAINER. WHEN EMPTY, CONTAINER MAY
HAVE VAPOR OR PRODUCT RESIDUE. DO NOT
CUT, PUNCTURE OR WELD ON OR NEAR THE
DRUM
GOOD VENTILATION SHOULD BE SUFFICIENT
GOOD GENERAL VENT. SHOULD BE
SUFFICIENT
RUBBER OR PLASTIC OIL RESISTANT
CHEMICAL SAFETY GOGGLES & IF HANDLED
HOT, FULL FACE SHIELD
NONE
NO
NO
NO
UNKNOWN
UNKNOWN
UNKNOWN
UNKNOWN
UNKNOWN
0
0
01
*REFINED MINERAL OIL
101316727
25
A-3