Figure 1-2 Front View (Open Dispensing Area - Dual Conveyors) - Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual

Figure 1-2 Front View (Open Dispensing Area - Dual Conveyors)

Item Name
1 Light Beacon
2 Computer
3 Front Panel
4 Exhaust Vent
5 Dispensing Area
Introduction
4
The Light Beacon is a device that displays system status and can warn
the operator when fault conditions exist.
The Dispensing System features a laptop computer which runs the
Fluidmove for Windows XP (FmXP) dispensing software.
Digital Valve, Fluid and Coax/Cooling Pressure Gauges, ON and OFF
Buttons, Emergency Stop, and Grounding Strap Jacks are located on the
Front Panel. See 1.10.3 Front Panel.
The Ventilation Exhaust System works in conjunction with the facility
exhaust system to remove excess heat, fumes, or odors.
The Dispensing Area is where all dispensing operations take place. See
1.10.1 Dispensing Area.
Description
5
1-9