Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual page 139

1
2
3
Item
1 Conveyor 1 Y-axis Controls (rear rail forward and backward movement)
2 Conveyor 1 X-axis Controls (belt left and right movement)
3 Radio Buttons (Conveyor 1 selected)
4 Radio Buttons (Conveyor 2 selected)
5 Conveyor 2 X-axis Controls (belt left and right movement)
6 Conveyor 2 Y-axis Controls (rear rail forward and backward movement)
2. Conveyor 1 position controls operate as follows:
On the X-Y control panel, the arrows pointing to the
the left and the arrows pointing to the
On the X-Y control panel, the arrows pointing
the back of the dispensing area and the arrows pointing
the front of the dispensing area.
3. Conveyor 2 position controls operate as follows:
On the X-Y control panel, the arrows pointing to the
the left and the arrows pointing to the
On the X-Y control panel, the arrows pointing
the back of the dispensing area and the arrows pointing
the front of the dispensing area.
NOTE The single arrows
distances per mouse click.
Operation
Conveyor 1
Figure 6-12 Conveyor Position Controls
and double arrows
Conveyor 2
4
Description
Left
move it to the right.
Right
move the Conveyor 1 rear rail toward
Up
Down
Left
move it to the right.
Right
move the Conveyor 2 rear rail toward
Up
Down
move the conveyor rail or belt different
move the Conveyor 1 belt to
move the rear rail toward
move the Conveyor 2 belt to
move the rear rail toward
6
5
6-15