Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual page 159

7. In the Production Window, click on
The Open Window (Figure 6-32) opens.
8. Select the program you wish to run and click on
The current program name will appear in the Production Window.
9. In the Production Window, click on
The Run Window opens (Figure 6-33).
10. Load the workpiece.
11. Click on
Go
Operation
Load
Figure 6-32 FmXP Open Window
Run
to start the dispensing process.
Figure 6-33 Run Window
.
.
Open
and then click on the
Run Production button.
6-35