Manuals; Training; Student Certification; Student Registration - Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual

1.4

Manuals

Your Spectrum Series S-920 Dispensing System arrives with manuals for installation and operation of
major system components and software. For some system components, you may receive Original
Equipment Manufacturer (OEM) manuals. Generally, these OEM manuals are only needed for reference
and advanced troubleshooting. Consult only Asymtek manuals unless directed to do otherwise by the
manuals themselves or by Asymtek Technical Support.
Below is a sample list of additional manuals that may be shipped with your Spectrum Series S-920
Dispensing System, depending on system configuration.
•
Fluidmove User Guide
•
Dispensing Valve Owner's Manual (specific to your valve)
•
Original Equipment Manufacturer Manuals (as applicable)
1.5

Training

Asymtek offers quality training for our dispensing platforms, valves, software, and applications both on
and off-site. The labs at our Carlsbad, California, USA corporate location are dedicated to providing a
specialized course of instruction for our customer's specific needs. With the assortment of tools available
in our labs we are able to provide a better learning experience overall. Students will rebuild machine
subassemblies, troubleshoot real problems, and learn a variety of setup techniques. In addition, your
machine's operability and production are not disturbed due to class usage.
1.5.1

Student Certification

Upon successful completion of the training course, the student is issued a Certificate of Completion.
1.5.2

Student Registration

Students can register for training at the Asymtek website
1-800-ASYMTEK to request information or to register for training.
1.6

Supported Dispensing Fluids

The S-920 was designed for dispensing the following materials. Contact Asymtek for materials not listed.
•
Flip Chip & CSP Underfill materials
•
Dam and Fill Encapsulation materials
•
LED Encapsulation materials (silicon based)
•
Lid Seal materials
•
Reagent dispense materials
•
Silicones
NOTE It is the responsibility of the end-user to consult the Material Safety Data Sheet (MSDS)
for all fluids used with the dispensing system. The MSDS provides material usage
instructions, disposal instructions, and safety precautions.
1-2
www. asymtek.com/support/training or call
Introduction