1.10.7 Rear Cabinet
Item
Name
1
Power Manager
Conveyor/Heater
2
Module (Dual Conveyor
Configuration shown)
Figure 1-9 Rear Cabinet (Dual Conveyor Configuration Shown)
Introduction
1
The Power Manager is located inside the rear cabinet. It houses the
Main Circuit Breaker and the Main Power Inlet. It also contains the
EMO circuitry. The EMO button, the green ON (I) button, and the black
OFF (0) button are directly connected to the Power Manager.
The Conveyor/Heater Module receives power from the Power Manager
and supplies AC power to the substrate heaters in the dispensing area.
It also controls all conveyor functions (motors, sensors, pneumatics,
etc.).
Description
2
1-17
Need help?
Do you have a question about the Asymtek Spectrum Series and is the answer not in the manual?