Parts Replacement; Overview; Record Keeping - Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual

9

Parts Replacement

9.1

Overview

This section includes general information for ordering recommended spares and replacement parts for
your Spectrum S-920 Dispensing System. Replacement part numbers are listed in
number information is also available on Asymtek's Find-A-Part web page:
http://webstore.asymtek.com/awweblive/apps/findapart_index.asp
This section contains the following procedures:
•
Parts Ordering Information
•
Cleaning and Inspection
•
Unpacking and Inspecting Replacement Parts
•
Gaining Access to Dispensing System Components
•
Replacing the Conveyor Belts
•
Replacing the Camera Lens
•
Replacing the Height Sensor Probe
•
Replacing Fuses
NOTE This section does not include the removal and replacement of dispensing valve
components. Refer to the manual for your specific dispensing valve for instructions.
WARNING!
9.2

Record Keeping

The type of service performed should be recorded in the dispensing system maintenance records. Dates,
part numbers/serial numbers of replaced parts, names of technicians, and other pertinent data should be
recorded.
WARNING!
Parts Replacement
CAUTION!
Operation of your S-920 Dispensing System involves heat, air pressure, electrical
power, mechanical devices, and the use of hazardous materials. It is essential
that every person servicing or operating the dispensing system fully understands
all hazards, risks, and safety precautions. Refer to
additional information.
Some part replacement procedures involve the use and disposal of hazardous
materials. Always follow the material manufacturer MSDS, facility requirements,
and local regulations for protection of personnel and disposal of materials.
Appendix C. Part
Section 2 - Safety for
9-1