Configuration With K7Dd Support Tool; Flow Of Configuration With The K7Dd Support Tool - Omron K7DD User Manual

2 Procedures
2-3

Configuration with K7DD Support Tool

Flow of Configuration with the K7DD Support Tool

Steps (1) and (2) are common to
Configuration with K7DD Support Tool. Refer to Common Settings (P.2-6) in the previous section.
Install K7DD Support Tool onto the computer before proceeding with configuration. Download the
software from the OMRON website.
https:///www.ia.omron.com/k7dd_tool
(1) Identify Voltage and Current of Device and Select
Special CT
(2) Installation and Wiring
(3) Set the Unit Number of the K7DD and Wire
Communications Cables
(4) K7DD Support Tool Operation
(4-1) Create a New Project
(4-2) Basic Settings
(4-3) Feature Analysis
(4-4) Logging, Alarm Settings
(6) Monitoring Operation
2 - 14
2-2 Configuration with the K7DD Unit Only and
Select the special CT to measure the voltage and current of
the monitored device.
Install the K7DD and wire for the current and voltage
measurement.
Refer to 3-6 Wiring the Communications Cables (P.3-14)
and 3-7 Setting the Unit Number (P.3-16).
The Support Tool has an "i" icon for each item.
For a detailed explanation, mouse over the "i" icon.
Communications settings, initial settings, and trigger
settings
Select abnormal data.
• Machine Condition Data
• Values Memorized in Monitoring Device
• Application Setting Flie
Confirm through logging that there are no problems with
the alarm thresholds calculated by feature analysis, and
configure the alarm settings on the K7DD.
(6-1) Check the Notification Status of the K7DD
Check alarm output and alarm output indicator display
for normal, warning, and critical statuses. Check the
monitored device and perform maintenance as needed.
If there was no need for maintenance, review the alarm
thresholds by repeating the procedure from step (4-2).
(6-2) Check the K7DD Operation after Maintenance
Confirm that the K7DD status is normal after
maintenance.
If the feature value does not drop to normal, there is a
possibility that there is another abnormal factor.
Power Line Data Generator User's Manual (N233)
2-3
Perform Maintenance