A Appendices
A-4 K7GE-MG Logging Tool
The K7GE-MG Logging Tool (this tool) makes it
easy to perform remote monitoring.
The main specifications of this tool are as follows:
•
Data for up to five sets of the monitoring device
can be logged.
•
A maximum of eight Probe Units can be
included in one set.
•
The measurement values and alarm status data
for each set can be logged. Up to 1,000 values
of data can be logged.
•
The setting parameters can be read and written.
The system requirements are as follows.
Supported OS
PC specifications
Excel
RS485-USB
communications converter
Refer to Help in this tool for details on using this tool.
You can download the latest version of this tool from the following OMRON website.
https://www.ia.omron.com/k7ge_tool
In the interest of product improvement, the K7GE-MG Logging Tool specifications are subject to change
without notice.
A - 8
Communications converter
Windows 10 64-bit edition, English or Japanese
1 GHz or faster CPU, 1 GB or more of RAM, and 16 GB or more of reserved disk
area
Excel 2019 32-bit or 64-bit edition, English or Japanese
* For Excel 2013/2016 32-bit edition, OMRON performed a connection test only on the
Japanese version in combination with the Japanese version of Windows 10.
Use a commercially available product.
* OMRON performed an evaluation test on the SI-35USB-2 manufactured by LINE EYE.
(The driver version is V2.12.18.)
Insulation Resistance Monitoring Device User's Manual (N224)
USB
RS-485
USB
Probe Unit
8 Units max.
1 set
PC
5 sets max.