5.1.10 Temperature Setting - YOKOGAWA Admag TI Series User Manual

5.1.10 Temperature Setting

The temperature setting is required when calculating the calorie based on the temperature
difference from the temperature that is taken in via MAO FB.
For details about the calorie measurement, refer to Subsection 5.5.6.
This parameter can be used only for AXG, not for AXW.
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
STB 101
STB 107
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
STB 104
Device setup ► Detailed setup ► Pro var ► Temperature ► (see below)
Device Configuration ► STB ► Device Configuration ► Configuration ► Process
Variables ► Temperature ► (see below)
Parameter
Display
Std temperature Standard Temperature
Fixed temperature Calorific Fixed Temp
Device setup ► Detailed setup ► Pro var ► Temperature ► (see below)
Device Configuration ► STB ► Device Configuration ► Query Device ► SnsrTB Original
Parameters(Part2) ► Page 1 ► (see below)
Parameter
Display
Meas temperature Measured Temperature
<5. Functions>
F Fieldbus
OUNDATION
F Fieldbus
OUNDATION
Description
Specifies the reference
standard temperature for using
the temperature-based density
correction function.
Specifies the reference
temperature to use for the
calorie calculation with
temperature difference from the
temperature which is input from
the outside.
Description
Displays the temperature that is
input from the outside.
IM 01E21A02-03EN
63