Alarm Record Function - YOKOGAWA Admag TI Series User Manual

From the table below, select the alarm display.
Selection
Display
Normal
NE107
5.6.5

Alarm Record Function

The alarm record function can record an alarm that occurred in the past as history.
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
STB 155
STB 156
STB 157
STB 158
STB 159
STB 160
STB 161
STB 162
The operation time when an alarm occurred is displayed in the format of "dddddD hh:mm".
"dddddD" indicates the day, "hh" indicates the hour, and "mm" indicates the minute.
Example:
"00031D 12:34" is displayed.
This example shows that an alarm has occurred when the product has been operating for 31
days, 12 hours, and 34 minutes.
F
OUNDATION
Fieldbus
Normal Sets to the normal alarm display.
NE107 Sets the alarm display based on NAMUR NE107.
Device setup ► Diag/Service ► Sts/Self test ► Alarm ► Alarm record ► (see below)
Diagnostic ► STB ► Device Diagnostics ► Diagnostics/Alerts ► Alert ► Alarm Record ►
(see below)
Parameter
Display
Record alarm 1 Alarm Record 1
Record time 1 Alarm Time 1
Record alarm 2 Alarm Record 2
Record time 2 Alarm Time 2
Record alarm 3 Alarm Record 3
Record time 3 Alarm Time 3
Record alarm 4 Alarm Record 4
Record time 4 Alarm Time 4
<5. Functions>
Description
F Fieldbus
OUNDATION
106
Description
Displays the name of the first
new alarm.
Displays the operation time
when the first new alarm
occurs.
Displays the name of the
second new alarm.
Displays the operation time
when the second new alarm
occurs.
Displays the name of the third
new alarm.
Displays the operation time
when the third new alarm
occurs.
Displays the name of the fourth
new alarm.
Displays the operation time
when the fourth new alarm
occurs.
IM 01E21A02-03EN