Display Item Setting - YOKOGAWA Admag TI Series User Manual

5.7.2

Display Item Setting

This product can show up to eight items on the display by scrolling it. Set each display item to the
eight display line.
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
LTB 14
LTB 15
LTB 16
LTB 17
LTB 18
LTB 19
LTB 20
LTB 21
From the table below, select the items to be shown on the display.
Selection
Display
None
Flow rate(%)
PV
Velocity
Volume flow
Mass flow
Flow rate(%Bar)
Calorie
Totalizer 1
Totalizer 2
PD tag
Commun protocol
Adhesion
Flow noise level
Totalizer 1 count
Totalizer 2 count
AI1 Flow rate
AI1 Flow rate(%)
AI1 Flow rate(%Bar) AI1 Flow rate(%Bar) Displays FIELD_VAL of AI1FB in a bar graph.
AI1.OUT
AI2.OUT
AI3.OUT
AI4.OUT
Device setup ► Detailed setup ► Display set ► Line select ► (see below)
Device Configuration ► LTB ► Device Configuration ► Configuration ► Line Select ►
(see below)
Parameter
Display
Line 1 Display Line Select 1
Line 2 Display Line Select 2
Line 3 Display Line Select 3
Line 4 Display Line Select 4
Line 5 Display Line Select 5
Line 6 Display Line Select 6
Line 7 Display Line Select 7
Line 8 Display Line Select 8
F
OUNDATION
Fieldbus
None Does not display items (item 1 is not selectable).
Displays the flow rate for the span of the process value PV-mapped
Flow rate(%)
in Subsection 5.1.2.
PV Displays the PV-mapped process value in Subsection 5.1.2.
Velocity Displays the flow velocity.
Volume flow Displays the volumetric flow rate.
Mass flow Displays the mass flow rate.
Displays the flow rate for the span of the process value PV-mapped
Flow rate(%Bar)
in Subsection 5.1.2 by using a bar graph.
Calorie Displays the calorie (only available for AXG, not for AXW).
Totalizer1 Displays the totalized value of totalizer 1.
Totalizer2 Displays the totalized value of totalizer 2.
PD Tag Displays PD Tag.
Commun Protocol Displays the communication protocol.
Displays the adhesion level of the electrode adhesion detecting
Adhesion
function.
flow noise level Displays the flow noise level (only available for AXG, not for AXW).
Totalizer 1 count Displays the count value of totalizer 1.
Totalizer 2 count Displays the count value of totalizer 2.
AI1 Flow rate Displays Simulate Value of AI1FB.
AI1 Flow rate(%) Displays FIELD_VAL of AI1FB.
AI1.OUT Displays OUT of AI1FB.
AI2.OUT Displays OUT of AI2FB.
AI3.OUT Displays OUT of AI3FB.
AI4.OUT Displays OUT of AI4FB.
<5. Functions>
F Fieldbus
OUNDATION
Description
Description
Specifies item 1 to be shown on
the display.
Specifies item 2 to be shown on
the display.
Specifies item 3 to be shown on
the display.
Specifies item 4 to be shown on
the display.
Specifies item 5 to be shown on
the display.
Specifies item 6 to be shown on
the display.
Specifies item 7 to be shown on
the display.
Specifies item 8 to be shown on
the display.
IM 01E21A02-03EN
113