5.8
Device Information
5.8.1
Order Information
Order information can be specified for this product. If a particular parameter is specified at
the time of ordering, this product is shipped with the parameter specified. If a parameter is not
specified at the time of ordering, that parameter needs to be set by the customer.
The format of the model and suffix code is as shown below.
Sensor:
AXG□□□ - □□□□□□□□□□□□□□ - □□□□□ / □
(1)
AXW □□□ - □□□□□□□□□□□□□□ - □□□□□ / □
(1)
AXW □□□ G - □□□□□□ - □□□□ - □□□ / □
(1)
AXW □□□ W - □□□□□□ - □□□□ - □□□ / □
(1)
Transmitter:
AXG□A - □□□□□□□□□□□ / □
(1)
AXW □ A - □□□□□□□□□□□ / □
(1)
(1) Model code, (2) Suffix code, (3) Optional code
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block
Relative
Name
Index
-
-
MTB
50
MTB
51
MTB
52
MTB
53
MTB
54
MTB
55
MTB
56
MTB
57
(2)
(2)
(2)
(3)
(2)
(3)
(2)
(3)
(2)
(3)
Device setup ► Detailed setup ► Device info ► Order info ► (see below)
Device Configuration ► MTB ► Device Configuration ► Device Information ► (see below)
Display
PD Tag
MS code ►
Model code
MS code ►
Suffix config 1
MS code ►
Suffix config 2
MS code ►
Option 1
MS code ►
Option 2
MS code ►
Option 3
MS code ►
Option 4
RS MS code ►
Model code
(3)
(3)
Parameter
F
Fieldbus
OUNDATION
-
Basic Model Code
Suffix Config 1
Suffix Config 2
Option 1
Option 2
Option 3
Option 4
Snsr Basic Model Code
<5. Functions>
Description
Displays PD Tag.
Max. 32 characters
Specifies the model code of the
integral flowmeter or remote
transmitter.
Specifies the suffix code of the
integral flowmeter or remote
transmitter.
Specifies the optional code
of the integral flowmeter or
remote transmitter.
Specifies the model code of the
remote sensor.
IM 01E21A02-03EN
124