Decimal-Point Position Setting - YOKOGAWA Admag TI Series User Manual

Selection
Display
IT1.OUT
IT2.OUT
AR.OUT
5.7.3

Decimal-Point Position Setting

The number of decimal places can be set to the automatic adjustment or fix mode for the
totalized value or process value PV-mapped in Subsection 5.1.2.
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
LTB 22
LTB 23
LTB 24
From the table below, select the position of the decimal point.
Process value
Selection
Display
Auto
0 digit
1 digit
2 digit
3 digit
4 digit
5 digit
Auto 2
Totalized value
Selection
Display
Auto
0 digit
1 digit
2 digit
3 digit
4 digit
5 digit
6 digit
F
OUNDATION
Fieldbus
IT1.OUT Displays OUT of IT1FB.
IT2.OUT Displays OUT of IT2FB.
AR.OUT Displays OUT of ARFB.
Device setup ► Detailed setup ► Display set ► Disp format ► (see below)
Device Configuration ► LTB ► Device Configuration ► Configuration ► Display Format ►
(see below)
Parameter
Display
Format PV Display Format Flow Rate
Format total 1 Display Format Total 1
Format total 2 Display Format Total 2
F
OUNDATION
Fieldbus
Auto Automatically adjusts the number of decimal places.
0 digit Fixes the number of decimal places to "0".
1 digit Fixes the number of decimal places to "1".
2 digit Fixes the number of decimal places to "2".
3 digit Fixes the number of decimal places to "3".
4 digit Fixes the number of decimal places to "4".
5 digit Fixes the number of decimal places to "5".
Automatically adjusts the number of decimal places in conjunction with
Auto 2
the span.
F
OUNDATION
Fieldbus
Auto Automatically adjusts the number of decimal places.
0 digit Fixes the number of decimal places to "0".
1 digit Fixes the number of decimal places to "1".
2 digit Fixes the number of decimal places to "2".
3 digit Fixes the number of decimal places to "3".
4 digit Fixes the number of decimal places to "4".
5 digit Fixes the number of decimal places to "5".
6 digit Fixes the number of decimal places to "6".
<5. Functions>
Description
F Fieldbus
OUNDATION
Description
Description
Description
Specifies the decimal-point
position for the process value
PV-mapped in Subsection 5.1.2.
Specifies the decimal-point
position for the totalized value of
totalizer 1.
Specifies the decimal-point
position for the totalized value of
totalizer 2.
IM 01E21A02-03EN
114