YOKOGAWA Admag TI Series User Manual page 109

Alarm record mask
„ „
If the alarm record mask function is turned "On", it disables the alarm record.
Setting example for alarm "Empty pipe detection":
To disable the alarm record, set "Empty detect on" of STB: Alarm Record Mask2 to "On".
To enable the alarm record, set "Empty detect on" of STB: Alarm Record Mask2 to "Off".
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
STB 152
STB 153
STB 154
NOTE
Note that an alarm masked with the alarm notification mask function is not recorded in the alarm
record.
The alarm mask function setting is as follows.
Parameter Name
Alarm Name
Default Value
Attribute
Alarm notification mask function
„ „
Display
Parameter
Alarm Name
Name
- 010:Main CPU FAIL
- 011:Rev calc FAIL
- 012:Main EEP FAIL
Mask 1-1 013:Main EEP dflt
- 014:Snsr bd FAIL
- 015:Snsr comm ERR
- 016:AD 1 FAIL[Sig]
- 017:AD 2 FAIL[Excit]
Device setup ► Diag/Service ► Sts/Self test ► Alarm ► Alarm record mask ► (see below)
Device Configuration ► STB ► Device Configuration ► Query Device ► SnsrTB Original
Parameters(Part2) ► Page 4 ► Alarm Record Mask ► (see below)
Parameter
Display
Mask 1-1
Alarm Record Mask1
Mask 1-2
Mask 2-1
Alarm Record Mask2
Mask 2-2
Mask 3-1 Alarm Record Mask3
Indicates the name of the mask setting parameter.
Indicates the alarm name.
Indicates the default setting values (at shipment from the manufacturing factory). (:
Masked, -: Not masked)
Indicates whether the mask setting is enabled or disabled. (: Setting enabled, -: Setting
disabled)
F
OUNDATION
Parameter
Name
-
-
-
Alarm out mask 1
-
-
-
-
<5. Functions>
F Fieldbus
OUNDATION
Fieldbus
Alarm Name
Main board CPU
failure
Reverse calculation
failure
Main board EEPROM
failure
Main board EEPROM
default
Sensor board failure
Sensor
communication error
A/D1 failure[Signal]
A/D2 failure[Exciter]
Description
Specifies the mask function for
alarm record 1-1.
Specifies the mask function for
alarm record 1-2.
Specifies the mask function for
alarm record 2-1.
Specifies the mask function for
alarm record 2-2.
Specifies the mask function for
alarm record 3-1.
Default Value Attribute
- -
- -
- -
-

- -
- -
- -
- -
IM 01E21A02-03EN
108