Totalization Direction Setting; Totalized Value Reset/Preset Function - YOKOGAWA Admag TI Series User Manual

5.2.6

Totalization Direction Setting

The totalization direction can be specified when using the totalization function.
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
STB 70
STB 79
From the table below, select the totalization direction.
Selection
Display
Balanced
Absolute
Only positive
Only negative
Hold
5.2.7

Totalized Value Reset/Preset Function

The reset/preset function can be specified for the totalized value. If the reset function is used,
the function resets the totalized value to "0". If the preset function is used, it sets the preset value
specified in advance to the totalized value. The preset function is used when starting to count
totalization from the specified value.
The setting can be configured with the following parameters.
Use of the reset/preset function
„ „
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
STB 72
STB 81
Device setup ► Detailed setup ► Totalizer ► (see below)
Device Configuration ► STB ► Device Configuration ► Configuration ► Totalizer ► (see
below)
Parameter
Display
Totalizer 1 ► Options Totalizer1 ► Total 1 Options
Totalizer 2 ► Options Totalizer2 ► Total 2 Options
F
OUNDATION
Fieldbus
Balanced Totalizes the flow rate (difference) of the forward and reverse directions.
Absolute Totalizes the absolute value of the flow rate.
OnlyPositive Totalizes only the flow rate in the forward direction.
OnlyNegative Totalizes only the flow rate in the reverse direction.
Hold Stops totalization processing (holding the current totalized value).
Device setup ► Detailed setup ► Totalizer ► (see below)
Device Configuration ► STB ► Device Configuration ► Configuration ► Totalizer ► (see
below)
Display
Totalizer 1 ►
Reset/Preset
Totalizer 2 ►
Reset/Preset
F Fieldbus
OUNDATION
Description
Parameter
F Fieldbus
OUNDATION
Totalizer1 ► Total 1 Preset
Totalizer2 ► Total 2 Preset
<5. Functions>
Description
Specifies the totalization
direction of totalizer 1.
Specifies the totalization
direction of totalizer 2.
Description
Uses the reset/preset
function of totalizer 1.
Uses the reset/preset
function of totalizer 2.
IM 01E21A02-03EN
69