Mao Function Block (Only Axg) - YOKOGAWA Admag TI Series User Manual

6.8

MAO Function Block (only AXG)

Relative
Index
Index
0 10000
1 10001
2 10002
3 10003
4 10004
5 10005
6 10006
7 10007
8 10008
9 10009
10 10010
11 10011
12 10012
13 10013
14 10014
15 10015
16 10016
17 10017
18 10018
19 10019
Parameter
Default Value
Name
Block Header "MAO"
ST_REV 0
Space (32
TAG_DESC
characters)
STRATEGY 1
ALERT_KEY 1
0x80(O/S)
0x80(O/S)
MODE_BLK
0x88(Auto, O/S)
0x08(Auto)
BLOCK_ERR 0x0000
CHANNEL 20(Temperature) O/S
0x0B
IN_1
0
0x0B
IN_2
0
0x0B
IN_3
0
0x0B
IN_4
0
0x0B
IN_5
0
0x0B
IN_6
0
0x0B
IN_7
0
0x0B
IN_8
0
MO_OPTS 0x0000
FSTATE_
0
TIME
FSTATE_
0
VAL1
FSTATE_
0
VAL2
<6. Parameter Lists>
Write
Mode
Information on this block, such as Block
O/S
Tag, DD Revision, Execution, etc.
Represents the revision level of the setting
parameter of the own block. This revision
-
is updated if the setpoint is changed. Used
to check for parameter change, etc.
Universal parameter to store a comment
AUTO
explaining tag contents.
Universal parameter intended to be used
AUTO for the high-level system to separate
function blocks.
Key information to identify where an alert
takes place. Generally, this parameter is
used by the high-level system to identify
AUTO specific areas in a plant that are under the
control of specific operators, to separate
necessary alerts only. This is one of the
universal parameters.
AUTO Universal parameter to show a block
- operation state. Consists of Actual mode,
AUTO Target mode, Permit mode and Normal
AUTO mode.
Indicates the error statuses related to the
-
own block.
Parameter to select a channel for the
transducer block to connect with. For this
product, 20 fixed.
AUTO
See 5.4.
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
Not used for this product.
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
Operational parameter to specify the
output operation of MAO Function Block.
Specifies a value to be transmitted to the
AUTO
sensor transducer block mainly at the fault
state. Bit assignment complies with the
Communication standard specifications.
Transits to the fault state when an input
AUTO continues to be Bad for more than time set
by FSTATE_TIME.
Value to be transmitted to the sensor
AUTO transducer block as input 1 at the fault
state. (Option)
Value to be transmitted to the sensor
AUTO transducer block as input 2 at the fault
state. (Option)
217
Description
IM 01E21A02-03EN