YOKOGAWA Admag TI Series User Manual page 119

From the table below, select the display item of trend graph.
Selection
F
OUNDATION
Display
Fieldbus
None None
Flow rate(%) Flow rate(%)
PV PV
Velocity Velocity
Volume flow Volume flow
Mass flow Mass flow
Calorie Calorie
Totalizer 1 Totalizer1
Totalizer 2 Totalizer2
(3) Update period setting
The setting can be configured with the following parameter.
Menu path
Display
Device setup ► Detailed setup ► Display set ► Optional config ► (see below)
F Device Configuration ► LTB ► Device Configuration ► Configuration ► Display Operation
OUNDATION
Fieldbus Configuration ► (see below)
Block Relative
Name Index
LTB 28 Period
From the table below, select the trend graph update period.
Selection
F
OUNDATION
Display
Fieldbus
0.2 s 0.2 s
0.4 s 0.4 s
1.0 s 1.0 s
2.0 s 2.0 s
4.0 s 4.0 s
8.0 s 8.0 s
Does not set any items (item 1 is not selectable).
Specifies the flow rate for the span of the process value that is mapped
with PV in Subsection 5.1.2.
Specifies the process value PV-mapped in Subsection 5.1.2.
Sets the display item to the flow velocity.
Specifies the display item to the volumetric flow rate.
Specifies the display item to the mass flow rate.
Sets the display item to the calorie (only available for AXG, not for
AXW).
Specify the totalized value of totalizer 1.
Specify the totalized value of totalizer 2.
Parameter
Display F
OUNDATION
Display Period
Sets the update period to 0.2 sec.
Sets the update period to 0.4 sec.
Sets the update period to 1 sec.
Sets the update period to 2 sec.
Sets the update period to 4 sec.
Sets the update period to 8 sec.
<5. Functions>
Description
Description
Fieldbus
Specifies the trend graph
update period on the display.
Description
118
IM 01E21A02-03EN