Display Line Count And Scroll Settings - YOKOGAWA Admag TI Series User Manual

Selection
Display
7 digit
5.7.4

Display Line Count and Scroll Settings

This product can show up to eight items on the display by scrolling, with four lines max. shown
at a time. The scroll method can be selected from the automatic display switching or the display
switching using the IR switch.
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
LTB 27
LTB 31
*1: From the table below, select the number of display lines.
The font size is automatically adjusted based on the number of the displayed line.
Selection
Display
1 line(big)
1 line
2 line
F
OUNDATION
Fieldbus
7 digit Fixes the number of decimal places to "7".
Device setup ► Detailed setup ► Display set ► Optional config ► (see below)
Device Configuration ► LTB ► Device Configuration ► Configuration ► Display Operation
Configuration ► (see below)
Parameter
Display
Line mode Display Line
Scroll mode Display Scroll
F
OUNDATION
Fieldbus
1 Line(Big) 1-line display without unit.
The numeric value is displayed in a large font.
1 Line 1-line display with unit.
2 Line 2-line display with units.
Description
F Fieldbus
OUNDATION
Description
<5. Functions>
Description
Specifies the number of lines to be
*1
shown on the display.
Specifies the display scroll
*2
method.
IM 01E21A02-03EN
115