YOKOGAWA Admag TI Series User Manual page 12

Maintenance
„ „
WARNING
• If dirt, dust or other substances adhere to the glass of the display, wipe them clean with a soft
dry cloth.
• Maintenance of this product should be implemented in a maintenance service shop where
necessary devices and environment condition are provided. The required environmental
condition is that the ambient temperature should be 5 to 40 °C (humidity of which maximum
relative humidity is 80% for temperatures 5 to 31 °C, and of which relative humidity linearly
decreases to 50% at a temperature of 40 °C when the temperature is over 31 °C).
microSD card
„ „
IMPORTANT
• Do not store or use the microSD card in places with static electricity near electrically charged
objects or where electrical noise is present. Doing so can result in electric shock or damage
to the microSD card.
• Do not disassemble or modify the microSD card.
• Do not physically shock, bend, or twist the microSD card.
• While reading/writing data, do not turn off the power, apply vibration or shock or pull out the
card. Data can be corrupted or permanently lost.
• Use only the microSD cards specified by YOKOGAWA. The operation cannot be guaranteed
when other cards are used.
• When inserting the microSD card into the product, make sure to orient the microSD card
correctly (face up or down) and insert it securely. If not inserted correctly, the microSD card
will not be recognized by the product.
• Do not touch the microSD card with wet hands.
• Do not use the microSD card if it is dusty or dirty.
• The microSD card comes formatted. If you would like to format the microSD card, use the
product's Format function.
• YOKOGAWA provides no warranty for damage to, or loss of data recorded on the microSD
card, regardless of the cause of such damage or loss. We recommend regularly making
backup copies of your data.
<1. Introduction>
IM 01E21A02-03EN
11