Other Setting - YOKOGAWA Admag TI Series User Manual

5.9.11

Other Setting

In addition, the maximum voltage values of the flow rate signal and coil resistance value are
displayed as diagnostic information.
This information can be checked with the following parameters.
The setting can be configured with the following parameters.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
DTB 42
DTB 43
Device setup ► Diag/Service ► Diagnosis ► (see below)
Diagnostic ► DTB ► Device Diagnostics ► Diagnostics/Alerts ► Diagnostics ► (see
below)
Parameter
Display
V peak hold Peak Hold Value
IEX resistance Iex Coil Resistance
<5. Functions>
F Fieldbus
OUNDATION
140
Description
Displays the maximum voltage
value of the flow rate signal
(only available for AXG, not for
AXW).
Displays the coil resistance
value.
IM 01E21A02-03EN