YOKOGAWA Admag TI Series User Manual page 275

(9) PlmeBasicCharacteristics
Sub-index Element
Channel
1 Statistics
Supported
Medium
AndData
2
Rates
Supported
3 IceVersion
NumOf
4
Channels
Power
5
Mode
(10) ChannelStates
Sub-index Element
1 Channel 1
2 Channel 2
3 Channel 3
4 Channel 4
5 Channel 5
6 Channel 6
7 Channel 7
8 Channel 8
(11) PlmeBasicInfo
Sub-index Element
1 InterfaceMode
2 LoopBackMode
3 XmitEnabled
4 RcvEnebled
PreferredReceive
5
Channel
MediaType
6
Selected
7 ReceiveSelect
(12) LinkScheduleActivationVaribale
Writing the version number of an LAS schedule, which has already been downloaded to the
domain, to this parameter causes the corresponding schedule to be executed.
On the other hand, writing 0 to this parameter stops the active schedule which is being
executed.
<Appendix 4. Link Master Functions>
Size [B] Value
1 0
8 0x490000000000000
2 1
1 1
1 1
Size [B] Value
1 0x00
1 0x80
1 0x80
1 0x80
1 0x80
1 0x80
1 0x80
1 0x80
Size [B] Value
1 0
1 0
1 0x01
1 0x01
1 0x01
1 0x49
1 0x01
Description
Statistics information are not supported.
Wire medium, voltage mode, and 31.25
kbps are supported.
Indicates the version for IEC Physical Layer
Entity.
0: Bus Powered
1: Self Powered
Description
In Use,
No Bad since last read,
No Silent since last read,
No Jabber since last read,
Tx Good, Rx Good
Unused
Unused
Unused
Unused
Unused
Unused
Unused
Description
0: Half Duplex
1: Full Duplex
0: Disabled
1: MAU
2: MDS
Channel 1 is enabled.
Channel 1 is enabled.
Channel 1 is used for reception.
wire medium, voltage mode,
31.25 kbps are selected.
Channel 1 is used for reception.
274
IM 01E21A02-03EN