YOKOGAWA Admag TI Series User Manual page 71

From the table below, select the reset/preset function. In the communication access of
F Fieldbus, the communication access is set with the procedures of the interactive
OUNDATION
operation guide called DD Method.
Selection
Display
Not execute
Reset
Preset
Preset value setting
„ „
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
STB 73
STB 82
NOTE
The parameter returns to "Not execute" after the totalization value reset/preset function has been
used.
F
OUNDATION
Fieldbus
Not execute Does not use the reset/preset function of the totalized value.
Reset Uses the reset function of the totalized value.
Preset Uses the preset function for the totalized value.
Device setup ► Detailed setup ► Totalizer ► (see below)
Device Configuration ► STB ► Device Configuration ► Configuration ► Totalizer ► (see
below)
Parameter
Display
Totalizer 1 ► Totalizer1 ► Total 1 Preset
Preset value Value
Totalizer 2 ► Totalizer2 ► Total 2 Preset
Preset value Value
<5. Functions>
Description
F Fieldbus
OUNDATION
Description
Specifies the preset value of
totalizer 1.
Specifies the preset value of
totalizer 2.
IM 01E21A02-03EN
70