YOKOGAWA Admag TI Series User Manual page 213

Index
Relative
Index
AI1 AI2 AI3
23 4023 4123 4223 4323 ACK_OPTION
24 4024 4124 4224 4324 ALARM_HYS
25 4025 4125 4225 4325 HI_HI_PRI
26 4026 4126 4226 4326 HI_HI_LIM
27 4027 4127 4227 4327 HI_PRI
28 4028 4128 4228 4328 HI_LIM
Parameter
AI4
Name
(only
AXG)
0xFFFF
0.5
0
FLT_MAX
0
FLT_MAX
<6. Parameter Lists>
Write
Default Value
Mode
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
212
Description
Sets operation to acknowledge
(acknowledgment for the
alarm) of various alarms.
By setting a bit to the alarm,
the device operates for the
alarm as if it is acknowledged
without the acknowledgment.
Bit assignment complies with
the Communication standard
specifications.
Threshold (hysteresis) against
clearing each alarm of HI_HI,
HI, LO and LO_LO. An active
alarm is cleared if the setpoint
goes into the normal value side
by the amount of hysteresis
from the limit value.
Specifies the priority for the
HI_HI alarm. It can be used
not just to set the priority, but
to disable alarm notification.
Meanwhile, to activate an
alarm on communication, it is
necessary to specify the priority
for alarm activation in advance.
To activate an alarm, set 3 or
more. By sending with priority
information being added in a
communication frame when the
alarm is activated, for example,
the alarm is used to apply a
filter to ignore values below the
specified priority on the host
side.
Specifies a limit value for the
HI_HI alarm.
Specifies the priority of the HI
alarm. Meanwhile, to activate
an alarm on communication,
it is necessary to specify the
priority for alarm activation in
advance. To activate an alarm,
set 3 or more. By sending with
priority information being added
in a communication frame
when the alarm is activated, for
example, the alarm is used to
apply a filter to ignore values
below the specified priority on
the host side.
Specifies a limit value for the HI
alarm.
IM 01E21A02-03EN