YOKOGAWA Admag TI Series User Manual page 53

Display Device setup ► Detailed setup ► Fieldbus info ► AI1FB* ► (see below)
F
Device Configuration ► AI1* ► Device Configuration ► Configuration ► Basic Setting ►
OUNDATION
Fieldbus (see below)
*For AXG, one from Al1 to Al4, and for AXW, one from AI1 to AI3.
Relative
Block Name
Index
AI1
- AI4(AXG)
15
AI1
- AI3(AXW)
By selecting the channel selected in AI1, a process is displayed as PV (Primary Variable) in
Selected Flow for STB.
Display Device setup ► Detailed setup ► Pro var ► (see below)
F Device Configuration ► STB ► Device Configuration ► Configuration ► Process
OUNDATION
Fieldbus Variables ► (see below)
Block Relative
Name Index
STB 45 PV flow select
Setting example: When the magnetic flowmeter is used by outputting the volumetric flow rate
from AI1 and setting the volumetric flow rate span at 100 m
below.
AI1: CHANNEL="Volume flow"
AI1: Transducer Scale.Units Index="m
AI1: Transducer Scale.EU at 100%="100.000"
AI1: Transducer Scale.EU at 0%="0.0"
STB: Volume Flow Span="100.0"
Setting example: When the magnetic flowmeter is used by outputting the mass flow rate from
AI1 and setting the mass flow rate span at 10000 kg/h and the density at 1000 kg/m
parameters as shown below.
STB: Density unit="kg/m
STB: Fixed Density="1000.0"
AI1: CHANNEL="Mass flow"
AI1: Transducer Scale.Units Index="kg/h"
AI1: Transducer Scale.EU at 100%="10000.0"
AI1: Transducer Scale.EU at 0%="0.0"
STB: Mass Flow Span="10000.0"
Parameter
Display F
OUNDATION
Channel CHANNEL
Parameter
Display F
OUNDATION
Selected Flow
/h"
3
"
3
<5. Functions>
Description
Fieldbus
Selects CHANNEL number
used in the AI function block.
Refer to Table 5.1.2.1 for
selection.
Description
Fieldbus
Displays the target process for
PV.
/h, set the parameters as shown
3
52
, set the
3
IM 01E21A02-03EN