Event Management Function; Storing Parameter (Backup) - YOKOGAWA Admag TI Series User Manual

5.11

Event Management Function

5.11.1

Storing Parameter (Backup)

The backup function can store parameter settings in the display's built-in memory (display
board) or microSD card (with the optional code MC selected). If the backup data is restored, the
parameter settings can be duplicated to another product. The display's built-in memory can store
data for three backups and the microSD card can store as much data as the capacity allows.
There are three backup methods available: Backup from the main board of this product to the
memory on the display board, backup from the main board of the product to the microSD card,
and backup from the memory on the display board to the microSD card. The file name, backup
name, and date can be specified using the backup function.
The data backed up to the microSD card is stored in the "YOKOGAWA" folder as a ".PAR" file.
The setting can be configured with the following parameters.
For details about the backup parameters, refer to Subsection 5.11.3.
Menu path
Display
F
OUNDATION
Fieldbus
Block Relative
Name Index
MTB 72
MTB 73
MTB 74
MTB 75
MTB 76
MTB 77
MTB 78
MTB 79
MTB 80
MTB 81
MTB 82
Device setup ► Diag/Service ► Param bkup/restore ► (see below)
Device Configuration ► MTB ► Device Configuration ► Maintenance ► Parameter
Backup/Restore ► (see below)
Parameter
Display
F backup name Factory Backup Name
F backup date Factory Backup Date
SD backup name SD Backup Name
Backup name 1 Backup Name 1
Backup date 1 Backup Date 1
Backup name 2 Backup Name 2
Backup date 2 Backup Date 2
Backup name 3 Backup Name 3
Backup date 3 Backup Date 3
Backup execute Backup Execute
Backup result Backup Result
F Fieldbus
OUNDATION
<5. Functions>
Description
Displays the backup name defined
at shipment from the manufacturing
factory.
Displays the backup date at
shipment from the manufacturing
factory.
Specifies the name of the file to be
backed up to the microSD card.
Specifies backup name 1.
Up to 16 characters
Specifies date 1.
Specifies backup name 2.
Up to 16 characters
Specifies date 2.
Specifies backup name 3.
Up to 16 characters
Specifies date 3.
Specifies the execution of the
*1
backup function.
Displays the result of the backup
*2
function.
IM 01E21A02-03EN
144