Sfp Eeprom Board - Xerox Phaser 6500 Service Manual

Color laser printer/multi-function printer

Hide thumbs Also See for Phaser 6500:

Table of Contents

SFP EEPROM Board

SFP PL8.2.16 (PWBA EEPROM [XPRO])

Phaser 6500/WorkCentre 6505 Service Manual

1. Remove Tray 1.

2. Open the Front Cover.

3. Remove the Rear Tray Cover (page 8-19).

4. Remove the Left Side Cover (page 8-18).

5. Remove the Rear Cover (page 8-20).

6. Remove the IP Board Cage (page 8-140).

7. Remove the MCU Board (page 8-138).

If a short Phillips-head screwdriver is unavailable to perform the following

step, remove the Laser Unit (page 8-86) to provide access.

8. Using a short Phillips-head screwdriver, remove the screw (silver, 6mm) that

secures the EEPROM Board to the chassis.

9. Disconnect P/J144 to remove the EEPROM Board.

Xerox Internal Use Only

Service Parts Disassembly

Workcentre 6505