Xerox Phaser 6500 Service Manual page 388

Print-Quality Troubleshooting
5-14
Troubleshooting Procedure (continued)
Step Actions and Questions
5 Reseat all IP Board connectors.
Is the image printed correctly?
6 Reseat the Laser Unit.
Is the image printed correctly?
7 Check the connections between the
Laser Unit and MCU Board.
Are P/J40, P/J 41, P/J411 and P/J
412 connected correctly?
8 Is the image printed correctly?
9 Replace the Imaging Unit
(page 8-7).
Is the image printed correctly?
10 Replace the IP Board (page 8-120).
Is the image printed correctly?
11
Replace the Laser Unit (page 8-86).
Is the image printed correctly?
12 Does the error persist?
Xerox Internal Use Only
http://www.manuals4you.com
Yes
Complete
Complete
Go to step 9.
Complete
Complete
Complete
Complete
Replace the
HVPS
(page 8-136).
Phaser 6500/WorkCentre 6505 Service Manual
No
Go to step 6.
Go to step 7.
Secure the
connectors,
then go to step
8.
Go to step 9.
Go to step 10.
Go to step 11.
Replace the
MCU Board
(page 8-138).
Complete