Sfp Control Panel - Xerox Phaser 6500 Service Manual

Color laser printer/multi-function printer

Hide thumbs Also See for Phaser 6500:

Table of Contents

Service Parts Disassembly

SFP Control Panel

SFP PL1.2.3 (Console Assy Panel)

1. Turn Off power and disconnect the power cord from the wall outlet.

2. Open the Front Cover.

3. Remove Duplex Unit if installed (page 8-162).

4. Release two hooks that secure the Control Panel to the Front Cover.

5. Disconnect P/J202 to release the Control Panel from the Front Cover.

Replacement Note

Make sure the wire harness is seated in the slot through the stiffener rib in the

Front Cover. If the harness is not properly seated in the slot, it could be

pinched by the Control Panel.

Xerox Internal Use Only

http://www.manuals4you.com

Phaser 6500/WorkCentre 6505 Service Manual

Workcentre 6505