Custom Toner Mode - Xerox Phaser 6500 Service Manual

Error Messages and Codes

Custom Toner Mode

Applicable Error Code
3-164
• 193-700:
Troubleshooting Reference Table
Applicable Parts
IP Board (ESS) (SFP PL8.1.7; MFP
■
PL8.1.2)
Troubleshooting Procedure
Step Actions and Questions
1 Check the Toner Cartridge.
Is Xerox toner installed in the printer?
2 Replace with known good toner
cartridges.
Does the error still occur when turning
on the power?
a.Advise the customer that Xerox cannot guarantee compatibility of non-
Xerox toner cartridges, and that use of non-Xerox toner can adversely af-
fect output quality.
Xerox Internal Use Only
http://www.manuals4you.com
Wiring and Plug/Jack Map References
—
Yes
Go to step 2.
Replace the IP
Board. (SFP,
page 8-120;
MFP,
page 8-144)
Phaser 6500/WorkCentre 6505 Service Manual
No
a
Complete.
Complete.