Phaser 6500/WorkCentre 6505 Service Manual
Hooks
Imaging Unit Socket
Socket Retainer
5. Lift the Imaging Unit socket to the top of the opening, and from the rear, pull
the socket from the chassis opening.
Replacement Note
When installing the Imaging Unit socket:
6. Insert the socket into the chassis opening, making sure the square
notches on the sides of the socket are seated over the posts in the
opening.
7. Insert the socket retainer. Make sure all the latches engage and the
rear of the retainer is flush with the chassis.
Xerox Internal Use Only
Service Parts Disassembly
s6500-504
8-149