Phaser 6500/WorkCentre 6505 Service Manual
8. Unplug the Front USB Harness (PL10.1.13) at P/J1301 on the IP Board; then
release the Front USB Harness from the USB Harness Guide (MFP PL8.4.5) and
from the clamp.
P/J1301
9. Pull the Front USB Harness out through the hole in the frame to remove the
harness from the printer.
Xerox Internal Use Only
Service Parts Disassembly
Wire Clamp
s6500-492
8-159