Xerox Phaser 6500 Service Manual page 566

Service Parts Disassembly
8-118
7. Release the harnesses from the locking clamp and pull the harness out from
the hole in the chassis.
8. Remove three screws (one silver, M4, 6mm; one silver, M3, 6mm; one silver,
tap, 8mm) that attach the Feed Drive Assembly to the printer.
9. MFP Only: Unplug P/J261 from the Color Mode Sensor on the Feed Drive
Assembly, and release the harness from the hook on the Feed Drive Assembly.
P/J261
Replacement Note
The screw holes in the assembly are marked with "M" and "T" to indicate
where machine (M) or tapping (T) screws are used.
Xerox Internal Use Only
http://www.manuals4you.com
s6500-302
Phaser 6500/WorkCentre 6505 Service Manual
6mm
6mm
8mm
s6500-301