Option Paper Path Sensor
PL12.4.13
Phaser 6500/WorkCentre 6505 Service Manual
Note
To simplify removal of feeder components, rotate the feeder to the rear side.
1. Remove the Optional Feeder (page 8-167).
2. Remove the Chute Cover (page 8-170).
3. Release the hook that secures the registration out actuator and move the
actuator to the right side of the roller.
4. Release the hook that secures the registration out actuator to the chute and
rotate the actuator up to access the sensor.
Registration
Input Actuator
5. Release three hooks that secure the sensor to the feeder.
6. Disconnect P/J4202 to remove the sensor.
Xerox Internal Use Only
Service Parts Disassembly
P/J4202
s6500-370
8-187