Iot Duplex Misfeed Jam / Iot Duplex Jam - Xerox Phaser 6500 Service Manual

IOT Duplex Misfeed JAM / IOT Duplex JAM

Phaser 6500/WorkCentre 6505 Service Manual
Applicable Error Codes
• 077-107 / 077-108
Troubleshooting Reference Table
Applicable Parts
Left Side Harness Assy (PL3.1.18)
■
Option Harness Assy (PL3.1.20)
■
Regi Roller Assy (PL3.2.9)
■
Regi Metal Roller (PL3.2.10)
■
Duplex Roller Assy (PL11.2.9)
■
Registration Sensor (Sensor Photo)
■
(PL3.2.13)
Fuser Assy (PL6.1.1)
■
MCU Board (SFP PL8.2.13; MFP
■
PL8.3.6)
Duplex Unit (PL11.1.1)
■
Warning
To avoid possible burns, allow the Fuser Assy to cool before beginning the
procedure.
Troubleshooting Procedure
Step Actions and Questions
1 Check the Front Cover for latching.
Open and close the Front Cover, then
check the latching.
Does the error still occur when
printing?
2 Check after resetting the Fuser Assy.
Reseat the Fuser Assy.
Does the error still occur when
printing?
3 Reseat the Duplex Unit.
Does the error still occur when
printing?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 1 - SFP Print Engine" on
■
page 10-6
"Map 2 - SFP Laser Unit and Feeder" on
■
page 10-7
"Map 4 - SFP MCU Board" on
■
page 10-9
"Map 6 - MFP Print Engine" on
■
page 10-15
"Map 7 - MFP Laser Unit and Feeder"
■
on page 10-16
"Map 9 - MFP MCU Board and HVPS"
■
on page 10-18
"SFP Media Feed" on page 10-27
■
"SFP Fuser" on page 10-33
■
"MFP Media Feed" on page 10-40
■
"MFP Fuser" on page 10-46
■
"SFP Duplex Unit" on page 10-36
■
"MFP Duplex Unit" on page 10-51
■
Yes
Go to step 2.
Go to step 3.
Go to step 4.
No
Complete.
Complete.
Complete.
3-127