Xerox Phaser 6500 Service Manual page 224

Error Messages and Codes
3-96
Troubleshooting Procedure (continued)
Step Actions and Questions
6 Check the Feed Drive Assembly for
operation.
Perform the procedure "Registration
Clutch" on page 4-33
Do the Feed, Regi, and Regi Metal
Rollers rotate properly?
7 Does paper feed from Tray 1?
8 Reset the Tray 1 Side and End Guides,
and return the tray to the printer.
Does the error still occur when
printing?
9 Remove Tray 1 from the printer.
Is the Separator Holder Assy free of
contamination and/or damage, and
does it rotate smoothly?
10 Remove Tray 1 from the printer.
Is the Feed Roller Assy free of
contamination and/or damage, and
does it rotate smoothly?
11 Perform the procedure "Tray 1 Feed
Solenoid" on page 4-34.
Does the Tray 1 Feed Solenoid operate
properly?
12 Does the paper leading edge stop
before the Regi Roller Assy and Regi
Metal Roller?
13 Check the paper path between the
Feed Roller Assy and Regi Roller Assy.
Are there any obstacles in the paper
path?
14 Perform the procedure "Registration
Sensor" on page 4-22.
Does the number on the screen
increase by one, when the actuator
(Registration Input Actuator) is
operated?
15 Remove the Lower Chute Assembly
(page 8-84; PL3.2.27) to check the
shape and operation of the
Registration Input Actuator (PL3.2.11).
Are the shape and operation normal?
Xerox Internal Use Only
http://www.manuals4you.com
Yes
Go to step 7.
Go to step 12.
Go to step 9.
Go to step 10.
Go to step 11.
Replace the
Cassette Assy
250. (Parts List
2.1 Tray 1.)
Go to step 13.
Remove the
obstacles from
the paper
transfer path.
Go to step 15.
Go to step 16.
Phaser 6500/WorkCentre 6505 Service Manual
No
Reseat or
replace the
Feed Drive
Assembly.
(page 8-117)
Go to step 8.
Complete.
Replace the
Separator
Holder Assy.
(page 8-6)
Replace the
Feed Roller
Assy.
(page 8-9)
Go to step 22.
The paper
leading edge
stops past the
Regi Roller Assy
and Regi Metal
Roller; go to
step 16.
Go to step 14.
Go to step 26.
Reseat the
Registration
Input Actuator.
If broken or
deformed,
replace it.