Phaser 6500/WorkCentre 6505 Service Manual
20. Remove the four screws (silver, tap, 8mm) that secure the Dispenser Assembly
to the chassis.
21. Remove the screw (silver, 6mm) that secures the rear side of the Dispenser
Assembly to the chassis.
22. Disengage the Dispenser Assembly from the boss on the chassis, and move
the Dispenser Assembly out and rearward to remove it.
Replacement Note
Align the boss on the chassis with the hole in the Dispenser Assembly before
tightening the screws.
Xerox Internal Use Only
Service Parts Disassembly
s6500-281
Boss
s6500-282
8-103