Copy Limit - Xerox Phaser 6500 Service Manual

Error Messages and Codes

Copy Limit

Applicable Error Code
3-94
• 062-790
Troubleshooting Reference Table
Applicable Parts
IP Board (ESS) (MFP PL8.1.2)
■
Troubleshooting Procedure
Step Actions and Questions
1 Check the error.
Does the error message disappear
automatically within 70 seconds, or
disappear after pressing OK?
2 Check the error
Does the error message still occur
when copying, scanning, or faxing the
original?
3 Check the original.
Print System > Information Pages >
Configuration, then copy, scan, or fax
the page.
Does the error still occur when
copying, scanning or faxing the
Configuration page?
4 Check the error.
Turn the power Off and On.
Does the error message still occur
when copying, scanning, or faxing the
original?
Xerox Internal Use Only
http://www.manuals4you.com
Wiring and Plug/Jack Map References
"Map 8 - MFP LVPS, IP Board, and
■
Drive" on page 10-17
Yes
Go to step 2.
Go to step 3.
Replace the IP
Board. (MFP,
page 8-144)
Replace the IP
Board. (MFP,
page 8-144)
Phaser 6500/WorkCentre 6505 Service Manual
No
Go to step 4.
Go to step 4.
Complete.
Complete.