Xerox Phaser 6500 Service Manual page 321

Phaser 6500/WorkCentre 6505 Service Manual
Main Drive Assembly
The Main Drive Assembly drives the Transfer Belt and Imaging Unit drums.
Note
Close (cheat) the Interlock Switch to provide power to the device under test.
1. Enter Service Diagnostics (page 4-8).
2. Remove Tray 1.
3. Open the Front Cover.
4. Lower the Transfer Belt.
5. Run the Main Motor test: Engine Diag > Motor Test > Main Motor Full2,
Full1, Half.
6. Verify that the Imaging Unit drums are rotating, and Transfer Belt is moving.
Note
Press Cancel to stop the test.
Xerox Internal Use Only
General Troubleshooting
s6500-119
4-29