Transfer Belt Pivot Kit - Xerox Phaser 6500 Service Manual

Transfer Belt Pivot Kit

PL 6.1.99 (Kit Pivot)
Phaser 6500/WorkCentre 6505 Service Manual
This procedure removes the left and right Transfer Belt pivot shafts.
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Remove the Right Side Cover (SFP, page 8-17; MFP, page 8-40).
4. Remove the Left Side Cover (SFP, page 8-18; MFP, page 8-37).
5. Rotate the Pivot Stopper so that its tabs align with the notches of the Main
Drive Assembly.
6. Remove the Pivot Stopper.
Note
When performing the next step, be ready to catch Gear T4 when you
remove the pivot shaft.
7. Pull out the Left Transfer Pivot shaft, and remove the Gear T4.
Xerox Internal Use Only
Service Parts Disassembly
s6500-291
8-109