Right Imaging Unit Restraint Block - Xerox Phaser 6500 Service Manual

Service Parts Disassembly

Right Imaging Unit Restraint Block

PL4.1.97 (Kit Block PHD Right)
8-94
Note
The following procedure applies to both the upper and lower Right Imaging
Unit Restraint Blocks.
1. Perform the service preparation steps on page 8-3.
2. Remove the Left Side Cover (SFP, page 8-18; MFP, page 8-37).
3. Remove the Rear Cover (SFP, page 8-20; MFP, page 8-43).
4. Remove the Right Side Cover (SFP, page 8-17; MFP, page 8-40).
5. Remove the Erase LED Assembly (page 8-97).
6. Use a miniature screwdriver to release the hook on the Imaging Unit Restraint
Block.
7. Remove the Imaging Unit Restraint Block.
8. Remove the Imaging Unit Spring.
9. Rotate the Imaging Unit Lever slightly and remove it.
Xerox Internal Use Only
http://www.manuals4you.com
Phaser 6500/WorkCentre 6505 Service Manual
s6500-275