Phaser 6500/WorkCentre 6505 Service Manual
16. Disconnect 7 connectors (P/J14, 15, 17, 18, 19, 29, 31) on the MCU Board.
P/J15
P/J14
P/J17
P/J31
P/J18
P/J29
17. Release all harnesses from the top and bottom guides on the Dispenser
Assembly.
18. Remove four screws (silver, tap, 8mm) that secure the Dispense Assembly to
the chassis.
19. Remove the screw (silver, M4, 6mm) at the rear side of the Dispense Assembly.
Xerox Internal Use Only
Service Parts Disassembly
s6500-283
s6500-281
8-105