General Troubleshooting
Sub Drive Assembly
4-30
The Sub Motor is located in the Main Drive and drives the Fuser and Developer.
Note
Close (cheat) the Interlock Switch to provide power to the device under test.
1. Enter Service Diagnostics (page 4-8).
2. Run the Sub Motor test: Engine Diag > Motor Test > Sub Motor Full2, Full1,
Half.
3. Verify that the Exit Roller is rotating.
Note
Press Cancel to stop the test.
Xerox Internal Use Only
http://www.manuals4you.com
Phaser 6500/WorkCentre 6505 Service Manual
s6500-120