Mfp Inlet Chassis - Xerox Phaser 6500 Service Manual

Color laser printer/multi-function printer

Hide thumbs Also See for Phaser 6500:

Table of Contents

MFP Inlet Chassis

MFP PL 8.4.11 (Chassis Inlet)

Phaser 6500/WorkCentre 6505 Service Manual

1. Perform the service preparation steps on page 8-3.

2. Remove the IIT Sub-assembly. (page 8-195)

3. Remove the Top Plate Assembly (page 8-59).

4. Remove two screws (silver, tap, 8mm) that secure the Inlet Chassis to the

printer, and remove the one screw (silver, with washer, 6mm) that attaches the

grounding terminal of the Inlet Switch Assy (PL8.3.7) to the printer.

5. Release the 2 hooks that secure the Inlet Chassis to the frame, and remove the

Inlet Chassis together with the Inlet Switch Assembly.

Xerox Internal Use Only

Service Parts Disassembly

Workcentre 6505