Service Safety Summary - Xerox Phaser 6500 Service Manual

Service Safety Summary

General Guidelines
Warning Labels
Safety Interlocks
Class 1 Laser Product
xx
For qualified service personnel only:
Precautions" on page xviii.
Avoid servicing alone: Do not perform internal service or adjustment of this
product unless another person capable of rendering first aid or resuscitation is
present.
Use care when servicing with power:
points in this product. To avoid personal injury, do not touch exposed connections
and components while power is On. Disconnect power before removing the power
supply shield or replacing components.
Do not wear jewelry: Remove jewelry prior to servicing. Rings, necklaces and
other metallic objects could come into contact with dangerous voltages and
currents.
Read and obey all posted warning labels. Throughout the printer, warning labels
are displayed on potentially dangerous components. As you service the printer,
check to make certain that all warning labels remain in place.
Make sure all covers are in place and all Interlock Switches are functioning
correctly after you have completed a printer service call. If you bypass an Interlock
Switch during a service call, use extreme caution when working on or around the
printer.
The Phaser 6500/WorkCentre 6505 is certified to comply with Laser Product
Performance Standards set by the U.S. Department of Health and Human Services
as a Class 1 Laser Product. This means that this product does not emit hazardous
laser radiation; which is possible only because the laser beam is totally enclosed
during all modes of customer operation. When servicing the printer or laser unit,
follow the procedures specified in this manual and there will be no hazards from
the laser.
Xerox Internal Use Only
http://www.manuals4you.com
Refer also to the preceding "Power Safety
Dangerous voltages may exist at several
Phaser 6500/WorkCentre 6505 Service Manual