Xerox Phaser 6500 Service Manual page 151

Phaser 6500/WorkCentre 6505 Service Manual
Error Code List & Error Message Summary (continued)
Error Message
Error Code
LCD
062 790 Copier Error
Last Sheet not Copied
Press Ok Button
071 100 Jam at Tray 1
Check Tray 1.
Open/Close Front Cover.
072 This code is given when the Optional 250 Sheet Feeder is installed.
100 Jam at Tray 2
Check Tray 2
Open/Close Front Cover.
101 Jam at Tray 2
Open Tray 2
Open/Close Front Cover.
This code is given when the Optional 250-Sheet Feeder is installed.
215 250 Feeder Error
Error 072-215
Restart Printer
216 Motor Error
Error 072-216
Restart Printer
900 Jam at Tray 1 or 2
Open Tray 1 or 2
Open Front Cover
075 101 Jam at Front Cover
Open Front Cover
and Remove Paper
102 Jam at Manual Feed slot
Remove Paper from
Manual Feed slot.
Open/Close Front Cover.
923 Reseat Paper in
the Manual Feed slot
077 100 Jam at Front Cover
Open Front Cover
and Remove Paper
101 Jam at Front Cover
Open Front Cover
and Remove Paper
Xerox Internal Use Only
Error Messages and Codes
Error Description
<Copy Limit>
Unable to continue due to copy
limitation.
<IOT Tray1 Misfeed JAM>
The Registration Sensor is not turned on
within the specified time after feeding a
paper from Tray 1.
<IOT Tray2 Misfeed JAM>
The Paper Path Sensor of Tray 2 is not
turned on within the specified time after
feeding a paper from Tray 2.
<IOT Feeder 2 JAM>
A jam has been detected between the
Registration Sensor and the Paper Sensor
of Tray 2.
<IOT Feeder Configuration Failure>
Option Sheet Feeder Configuration error
is detected.
<Option Feeder Motor Failure>
Option Feeder Motor failure is detected.
<IOT Remain Option Feeder JAM>
Paper remains at the Paper Path Sensor
of Tray 2.
<IOT SSF Insert JAM>
Manual Feed No Paper Sensor detects
when a paper is inserted from Manual
Feed slot.
<IOT SSF Paper Pullout JAM>
Though it tried to feed a paper from
Manual Feed slot, the paper was not
loaded or it was pulled out forcibly from
Manual Feed slot.
<Waiting for reseat paper of SSF>
Wait for the paper in the Manual Feed
slot to be reseated.
<IOT Regi On early JAM>
Paper remains at the paper transfer path
between Tray 1 and the Registration
Sensor.
<IOT Regi OFF Jam>
The paper does not pass through the
Registration Sensor within the specified
time.
Go To
page
94
page
95
page
100
page
105
page
110
page
111
page
112
page
113
page
113
page
113
page
115
page
117
3-23