Option Registration Roller - Xerox Phaser 6500 Service Manual

Color laser printer/multi-function printer

Hide thumbs Also See for Phaser 6500:

Table of Contents

Option Registration Roller

Phaser 6500/WorkCentre 6505 Service Manual

To simplify removal of feeder components, rotate the feeder to the rear side.

1. Remove the Optional Feeder (page 8-167).

2. Remove the Front Cover (page 8-168).

3. Remove the Left Side Cover (page 8-169).

4. Remove the Chute Cover (page 8-170).

5. Remove the Drive Clutch (page 8-174).

6. Remove the Feed Gear Kit (page 8-178).

7. Remove the Registration Roller Bearing (page 8-181).

8. Release the hook that secures the Registration Out Actuator and move the

actuator to the right side of the roller.

9. Release the hook that secures the actuator to the Upper Feeder Chute and

rotate the actuator up.

When removing the gear and bearings from the Registration Roller it may

be helpful to push the metal registration roller towards the front of the

Optional Feeder.

Xerox Internal Use Only

Service Parts Disassembly

Registration Out Spring

Workcentre 6505