Adf Cover Open - Xerox Phaser 6500 Service Manual

ADF Cover Open

Phaser 6500/WorkCentre 6505 Service Manual
Troubleshooting Procedure (continued)
Step Actions and Questions
4 Check the paper feeding
Does the ADF feed the document?
5 Check the document path
Open the ADF Cover and check the
document path.
Is there a foreign substance on the
document path?
6 Replace the ADF Assy. (page 8-192)
Does the error still occur when
copying?
7 Check the ADF Feed Roller installation
Is the roller installed correctly?
Also are they not contaminated or
damaged, and rotate smoothly?
Applicable Error Code
• 005-301
Troubleshooting Reference Table
Applicable Parts
IP Board (ESS) (SFP PL8.1.7; MFP
■
PL8.1.2)
ADF Assy (PL10.1.3)
■
ADF Top Cover (PL10.1.4)
■
Troubleshooting Procedure
Step Actions and Questions
1 Is the ADF Cover completely closed?
2 Is the ADF Cover damaged?
3 Reseat the connector (P/J1003) on the IP
Board.
Does the error still occur when copying?
4 Check after replacing the ADF ASSY
Replace the ADF Assy. (page 8-192)
Does the error still occur when copying?
Xerox Internal Use Only
Error Messages and Codes
Yes
Go to step 5.
Remove the
foreign
substance.
Replace the IP
Board
(page 8-144).
Replace the
ADF Assy.
(page 8-192).
Wiring and Plug/Jack Map References
"Map 8 - MFP LVPS, IP Board, and
■
Drive" on page 10-17
"ADF" on page 10-48
■
Yes
Go to step 2.
Replace the
ADF Cover.
Go to step 4.
Replace the
IP Board.
(page 8-144)
No
Go to step 7.
Go to step 6.
Complete.
Replace the
Feed Roller
Assy &
Separator Pad
Assy.
(page 8-13.)
No
Close the
ADF Cover.
Go to step 3.
Complete.
Complete.
3-37