Transfer Belt Cleaner - Xerox WorkCentre 7132 User Manual

Transfer Belt Cleaner

Xerox WorkCentre 7132 User Guide
Downloaded From ManualsPrinter.com Manuals
3.
Fasten the unit into position by
rotating the screws clockwise.
4.
Close the side cover.
5.
Connect the power cord, then turn the power switch on of the machine.
6.
Select [Fuser SMart Kit] on the [Consumbles Status] screen.
When the [Consumbles Status] screen does not appear on the touch screen, press the
<Machine Status> button on the control panel, select the [Supplies] tab on the touch
screen, then select [Fuser SMart Kit].
7.
Select [Reset Counter] on the
screen.
8.
Select [Yes] to reset the counter.
The Transfer Belt Cleaner lasts approximately 100,000 copies and prints. The machine
will display a warning message approximately 1,500 copies and prints before the
SMart Kit (Customer Replaceable Units)
369